Pages

Showing posts with label instructions. Show all posts
Showing posts with label instructions. Show all posts

Wednesday, June 27, 2018

Whales and Ducks

I have been so busy this past week with Group Fitness things and many other things that I just needed time to scrapbook.  So the other afternoon I went into my craft room and put together a layout.  It was great because it was one of those pages that almost put itself together.  I knew almost exactly what I wanted it to be like.  I wanted a white layout (very strange for me, I like lots of colour) with some white on white elements.  The reason I wanted white was because the whales in my photos were white and I wanted the layout to depict more about the whales.  I had never seen Beluga Whales before.  Grace had mentioned seeing them on her last visit to San Diego.  So it was very special for me to see these normally shy creatures.

I cropped two of my photos to be 4"x 4" and placed my photos as you see.  I wanted them on white so I cut a piece of cardstock to measure 10"x 11".  I then wanted to use one of my border punches (which I had recently been reunited with after them being in storage for nearly 6 months) I also wanted another border punched out and layered above the first large border.

I adhered my photos in place then added the second small border which I punched from a scrap piece of cardstock leftover from trimming down the white cardstock.

I put this white base on some light blue cardstock.  I punched 5 circles measuring 3/4" each and adhered them in the bottom right corner being sure to have the first one hanging off the page for some interest.  Once I liked there placement I cut the excess off the circle hanging over the edge and added it to the top left corner.  I didn't want to throw away that little piece, silly, but I like the result.

I found some little light blue bling and added them to the circles.  I was going to put them in the center so that they would all look the same, but then changed my mind.  I like how they look all different and so added a couple (3) extra round the circles.

Lastly I added my title which I cut from using my Silhouette Cameo.

Well, that is my tale about my 'whale' layout.  Now to fill you in on my 'duck', or in this case duckling.

I currently have a wee little duckling living in my bath tub.  Oh, it is so cute.  It has been nicknamed "Peepers".  We have some very early duck and duckling families in my backyard.  One is a mother of 4 (now 3 but at the time of this incident she had 4).  She has been round the house for a few days with her babies so I have been feeding them some rolled oats.  Anyway, the other afternoon I could hear some distressing peeping.  I went out my front door and there was mother of 4 attacking this stray little duckling.  She was really pecking at this wee thing.  I could not stand by and see this so I intervened.  Then, mother of 4 was thinking I was going to go after her four babies so she was getting ready to attack me.  Stray duckling joined her 4 so I thought OK she is defending it, it should be OK
now.  I walked away but saw she started to attack it again.  This time I caught the little duckling, but mamma was not going to let me pass.  It didn't help that duckling was peeping so mamma defended and flew at me.  I told mamma to be nice to it and let it go, just for her to start attacking again.  This time I rescued the duckling and made it into the house.

I have a cat box set up in my bathtub with a warm heat pack for it (I warm it regularly).  There is also an ice-cream container of water for drinking and swimming.  I also have food all over the floor of the bath tub.  It seems happy enough.  I take it out of the tub now and then to let it run around (when I can make an area secure).

I am not sure how my cats are going to take to this little one.  So will need to be careful for a little while.  The cats don't care about ducklings in our backyard, but could be different with one in the house.

Monday, September 18, 2017

Beyond the Stars

I have been playing with a new technique for card-making.  I have to admit I have had fun with this.  I don't normally like getting messy, but this was a fun messy.

For this you will need inks that will blend easily.  I found using bright colours was a lot of fun.  I used the Distress Oxide Inks from Ranger.  But I understand you can use the normal distress inks and some die inks.  For the black I used Momento's Black Tuxedo ink.

To start with add smooches of colour to your 6"x 4" plain cardstock - a light colour works best such as a white or cream.  I used four colours. I added the inks using the ink applicators from Ranger

Using a make-up sponge I added some black ink over the top of all the colours.  This will look as though you have ruined it.  Take it from me, you haven't, keep going. Let this dry, you can use a heat tool to speed this up if you like.

Add a bit of colour over the to and then dry again.  I added a little bit of the blue.

To finish off your galaxy flick some white paint over your cardstock.  Or you can add some white pen dots - varying the sizes of dots helps with the effect.

Now you have a galaxy.

Add to your card.  You can add stamps and other embellishments for finish your card.

Have fun and create something amazing!


Monday, September 5, 2016

It's the little things that make life Big!

I hope you all were able to celebrate Father's Day yesterday (in NZ).  I made my Dad a cute little card and will be sending it shortly.  It just did not happen before Father's Day, but I did get to talk with him yesterday which was really nice.  My Dad lives in a little town up north, just South of Kerikeri.  I miss going out for a hot chocolate with him at a local cafe.

Ok last week I promised to do a colouring post this week.  So I have two cards here for you.  One of which I did use for my Dad's Father's Day card.  So I will start with that one first (I am hoping to do a video on how I did this technique soon - I miss making videos).

I created this card using Watercolour paper and Distress Crayons.  These are really nice to use. See the video below where Tim Holtz takes you through using Distress Crayons.
So I used my set of Festive Berries, Rusty Hinge, Fossilized Amber, Peeled Paint, Chipped Sapphire and Seedless Preserves.  I took each colour and added it to more watercolour cardstock to make an Ombre look.  Then I took a wet-wipe and carefully wiping from left to right and slowing down ward to move and blend the colours.

Once dry I stamped with my favourite dandelion puff stamp.  Later I added a sentiment 'For my Dad'
I was not totally happy with the blending but I am going to try this again on the smooth side of the watercolour paper to see if that helps move the colour and blend better.

Here is my second card that I made.  I really love how this one turned out.  Firstly I used one of my Party Paws stamps from Crafter's Companion and a sentiment stamp from Kaiser Craft.
To colour this I used my Spectrum Noir pens.  I used TN2, TN3 and TN4 for the teddy.  The TN3 and TN4 are from the 'Lights' set of pens, they give a really rich, warm colour to teddy.  So I started colouring this Teddy's head first and then the rest of the body.

When I was happy with how Teddy looked I went onto the gift.  I used TB1, TB2 and TB3 from the basic blues set of 6 pens.  TB2 is quite a different blue so I used that as my base for the side of the gift going over it with TB1 so it looks a little darker.

For the ribbon on the gift I used DR1, DR5 and DR7.  Use the DR7 sparingly as it is very dark.  To finish off I used EB1 for the tag and IG4 for the ground shadow.

Very happy with the result of my colouring for this card.

Monday, August 15, 2016

Title Spacing Trick

I love cutting out my titles using my Silhouette Cameo, but have often found once cut out I can't get the title to look good on my layouts as my letter and word spacing goes out the window.
Just last week, I cut out a title and took it will me to finish the layout at a craft group.  While at the craft group I started using the negative space of my leftover title as a guide as to where to put my letters on my layout.  Wow, it worked and was so easy.  Let me show you how I did.


First take you layout and place the negative space of your title onto your layout and decide where you want your title to be.


Once you are happy with the placement of your title start adding adhesive to the back of your letters and adhere them back into the space where they were cut from.


Carefully remove the negative space cardstock from your layout


Check out your perfect looking title. Here is the finished two page layout.
This has become a favourite way to get my titles looking the way I want them.  It helps to design and cut out your title using your Silhouette, Scan'n'Cut or Cricut so that it cuts the way you want it to look on your finished layout.


Thursday, November 12, 2015

Craft Out West - Card from Die-cut kit

I am so sorry it has been way too long since my last posting.  I so wanted to do better getting things up on my blog this year, but as you can see things really got away from me.

Well to make up for it I have a really fun card that I have created from a little giveaway set of die-cuts that I was giving away at Craft Out West last weekend.  The show was fantastic as usual and I truly loved meeting so many talented people.

I was giving away a set of die-cuts to those that purchased from me or mentioned my newsletters at my table during the show.  One of the die-cuts in this set looked like this:
I am sure some of you looked at this die-cut and thought, "What can I do with this?"  Well I am here to answer that question.  Here is a small card I created using this die-cut as the front of my card.
So to create this card, I took a 6"x 4" piece of cream cardstock and folded it to measure 4"x 3" with the fold at the top of the card.

Next I added a piece of ribbon to the die-cut piece.

Adhere some foam to the back of the die-cut piece then adhere the die-cut to the front of the card.

Using a 1" circle punch I punched out three circle from pattern paper and adhered them through the holes on the die-cut piece.

I hope you enjoy this little project.

I have another card project that I would like to share soon

Let's get crafty this weekend ...

Monday, April 20, 2015

My new obsession - Glass Etching

Oh who would have thought ....

As many of you know I love my Silhouette Cameo, but now I love it even more as I can now use it to cut designs that I can now etch onto glass.  For some reason when I thought of glass etching I thought there was a machine you popped your glassware into and it 'tattooed' the design onto the glass - OK you can stop laughing at me now.  Well, I saw recently that you could get a glass etching kit for the Silhouette machines and I just had to look into it a bit further.  After watching the video on You Tube and saw how easy it was (click here for video), and that you needed no extra tools and just had to order the kit.

So my kit arrived, I opened it, watched the video then left it for about a week and a half before actually giving it a go.  I did not want to mess it up.  Well over the weekend I did another project with the glass etching and now I am wondering round the house and off to the Warehouse looking at glassware that I can etch.  It did expect the etching to be a bit whiter, but I still love the end results.

So here is what I did.
After cutting my design on the vinyl, I used the tranfer paper to add the design to my glass jar.  I taped of the top and bottom edges using some washi tape then added a nice thick layer of the glass etching cream. (be sure to wear rubber gloves for this).  I left this lot of cream on for about 15 minutes.
After about 15 minutes I scrapped up the excess glass etching cream and put it back in the bottle so it can be used again on my next project.  Then I gave the jar a bit of a rinse, to rinse off the last remaining bits of the etching cream.  Then removed the vinyl stencil.
Here is the finished result. I am happy with this, now what to put in the jar ... and now ... another piece of glassware hunt.

This Glass Etching Kit for the Silhouette is available to order from my online shop - click here

Wednesday, April 15, 2015

Starburst Card Tutorial

I came across a fun card and just had to give it a go and here is my result.  I am really pleased with how this star-burst card came together.  It was so much fun that I just had to share with you how to create one for yourself.
You will need:

3 3/4"x 5" cardstock
3 7/8"x 5 1/8" cardstock mat
Cut 1: 4 1/2"x 1 1/2" pattern paper
Cut 1: 4"x 1 1/2" pattern paper
Cut 2: 3"x 1 1/2" pattern paper
Cut 2: 2"x 1 1/2" pattern paper
8 1/4"x 5 3/8" cardstock folded in half to create your card base
2" circle punch
Larger scallop circle punch
Tape adhesive
Foam tape
Sentiment sticker or stamp

To Make:

Take each pattern paper rectangle and cut on the diagonal from corner to corner to create 12 triangles.

Using the rule of thirds and your star-burst will be bursting from the top third grid square as shown below on the 3 3/4"x 5" cardstock.

Arrange your triangle pieces round that point on the grid until you like the pattern from the triangles. Be sure there is a little space between each triangle so the background cardstock is showing through. Don't worry that they are hanging off the edge.
Once you like the look adhere the pattern paper triangles, you may even like to flip over some of the triangles and use the pattern on the other side of the paper.

Trim away the excess of the triangles to the edge of your cardstock

Mat your star-burst to the 3 7/8"x 5 1/8" cardstock mat.
Then adhere your matted star-burst to your card front

Punch a 2" circle form coordinating cardstock and add your sentiment sticker or stamp to it.
Mat your circle to a slightly larger scallop circle punched from another piece of coordinating cardstock.

Adhere your matted circles using foam tape to hide where the

star-burst triangle points meet.



Wednesday, April 9, 2014

Colouring Modeling Paste


I wanted to share with you a project I created on the weekend where I used some more of the Teresa Collins Modeling Paste - I am really loving this and adding texture to my projects.
I thought it would be fun to add a bit of colour so here is what I did.
I started with a blank canvas - this canvas is one of those flat ones.
Next I used some really fun spray inks.  I used three different makes and colours, Heidi Swap Colour Shine, Tattered Angels glimmer mist and my own home-made spray ink.
I sprayed all over the canvas, now because the surface of this canvas has been treated with Gesso (like most bought canvas') the ink did not seep into the canvas but rested on the top, so to dry it I used my heat too.  Love the effects I got with the blending of the inks, even the splotches look cool.
Next I grabbed one of my 6"x 6" Crafter's Workshop Templates and added some modeling paste just in white.

Then I wanted to add some colour to my modeling paste.  So I added some of the paste to a little plate, then using the spray ink that I used on my canvas I sprayed some colour to the modeling paste and mixed it together a bit.  Now because I had added some extra liquid to the paste it was a big more soft, almost sloppy so be careful how much ink you add.
I used two different templates with the coloured modeling paste, I used the Teresa Collins Scallop 12"x 12" stencil and a small journaling stencil for a last bit of interest in the bottom right corner.
Before drying the modeling paste with my heat tool, I went and washed all my templates, just with cold water and my fingers.
When using your heat tool to dry modeling paste be careful as some heat tools are too hot and can cause modeling pastes to start to bubble.  I also left this to dry overnight.
The following day I added some punched shapes using my Martha Stewart layering punches and a little bit of bling.  I am really pleased with the results.

I would love to see what you create with colouring some modeling paste for your next project.  Please leave a comment below and let me know what you think of this fun wee project.

Tuesday, March 18, 2014

Glitter and Modeling Paste

I thought it would be fun to have a look at working with glitter and modeling paste.
Modeling paste and stencils are proving more and more popular, so let's try something a wee bit different and glitter on top and into modeling paste and see what we get.

We will start with adding glitter on top of the modeling paste.
So you will take your cardstock and add your stencil on top.  I taped mine in place with some removable tape, you could use washi tape.

 I am working on my Bazzill Splatter mat for easy clean up.
Next add your modeling paste, I chose to just add it down the right edge of my blue cardstock.  If you are not doing the whole stencil it can be fun to leave some half pasted shapes (it looks almost like torn paper).  As you can see I have removed the stencil so you can see the result.  Place a piece of scratch paper under the stenciled edge ready for glitter.
For this step you do need to move a bit quickly as the modeling paste is starting to dry.  Take your choice of glitter - I chose gold - and sprinkle it on all over the modeling paste.  Do not use your finger to spread the glitter as you will smoosh the modeling paste.
When you are happy with the coverage, gently slide the excess glitter onto the scratch paper and put it away.  Now leave the glitter and modeling paste to dry.  You will find that your cardstock will curl but the modeling paste is meld-able enough to gently straight back up.
Lastly have fun creating your layout.

Now lets look at adding some glitter too the modeling paste.  For this you will need a dish to mix your paste and glitter on.
Add a good dollop of modeling paste and then add a good dash or three of glitter.  Then mix thoroughly using your palette knife.
You will end up with something like this.
Next prepare your cardstock, add your stencil.  Then start applying your modeling paste.  As you can see you do not need to cover the whole stencil you can do just areas you feel will look good for your finished layout.  Enjoy the process of smoothing out the modeling paste.  It is a good idea to try and use up the modeling paste that has the glitter in it as you will not want to put it back in your modeling paste jar.
Remove your stencil and leave to dry.  The glitter does not shine through like when using the other technique but it does give quite a fun speckled look.
Once dry create your layout.
Here is a close up where you can see that speckled look with the glitter and modeling paste.

I hope you enjoy giving these two techniques a try with your modeling paste.
Remember to clean your stencil as the modeling paste does try quickly.  Just pop the stencil in a basin of water (be sure the water covers the stencil) until you are ready to clean it.